Current sensor

  • Completely non-contact and surface-mounted
  • Mounted on the cable that you want to monitor with cable ties. Installation procedure allows to determine the optimal location of the sensor on the cable
  • Maintenance free (turn on and forgot) and fully autonomous
  • Compatible with unshielded and unarmored cables with an insulation thickness of no more than 2 mm
  • Detects the electric alternating current 450 mA or more (with a supply voltage of 220 V).
  • When an alternating current is detected above of lower the defined threshold, a message is immediately sent over the radio channel
  • Used to monitor the operation of a wide variety of equipment sach as network computer equipment, UPS, diesel generators
  • Successfully transmits data even from shielded environments such as server rooms and etc.
  • Powered by an ER14505 battery (included) rated for 50,000 messages, guaranteeing a minimum of 5 years of operation (one message per hour)


Operating temperature: -40 to +80°C
Ingress Protection Code: IP45
Power system type: autonomous
Supply voltage: 3.6V
Battery type: 14505
Weight: 64 grams
Dimensions: 170×28×28 mm
Frequency range: 863.0-870.0 MHz
Transmitter output power: 25mW
Click to order
Made on